FPSO's
As the search for new oil and gas reserves increases, offshore exploration companies have been forced to drill in deeper water. The conditions in these applications heavily influence which type of installation to use.
Trolex Engineering can design, build and manufacture a range of units to suit these applications. Typically built using electrical slip rings and fibre optic rotary joints, they can be used in a variety of Floating, Production, Storage and Offloading (FPSO) Systems, providing uninterrupted delivery of electrical power and signals and fibre optic signals, in hazardous areas.
For a requirement without a through bore for the product pipe, there are many standard products available, either weather protected or explosion protected, which can be readily adapted for use on an FPSO.
We have manufactured high voltage and high current slip rings for many years and are experienced with voltages of 11kV and throughput current of 4,000 Amps.
No matter where you are, Trolex Engineering has the right solution for your next application. A range of FPSO Slip Rings which we have designed and manufactured are detailed below.
Trolex Engineering can design, build and manufacture a range of units to suit these applications. Typically built using electrical slip rings and fibre optic rotary joints, they can be used in a variety of Floating, Production, Storage and Offloading (FPSO) Systems, providing uninterrupted delivery of electrical power and signals and fibre optic signals, in hazardous areas.
For a requirement without a through bore for the product pipe, there are many standard products available, either weather protected or explosion protected, which can be readily adapted for use on an FPSO.
We have manufactured high voltage and high current slip rings for many years and are experienced with voltages of 11kV and throughput current of 4,000 Amps.
No matter where you are, Trolex Engineering has the right solution for your next application. A range of FPSO Slip Rings which we have designed and manufactured are detailed below.
TX4790 - Combined Power and Signals
Height: 2.8m Width: 0.8m Bore: 356mm Approval: Baseefa EN50 014, 018 & 019 Code: EExde IIB T5 IP66 Zones 1 & 2 Testing: 20kA Fault Level |
TX4791 - Power 1.2MW
Height: 1.6m Width: 1.1m Bore: 465mm Approval: Baseefa EN50 014, 018 & 019 Code: EExde IIB T5 IP66 Zones 1 & |
TX4792 - Combined Power and Signals
Height: 2.2m Width: 1.3m Bore: 250mm Approval: Baseefa EN50 014, 018 & 019 Code: EExde IIB T5 IP66 Zones 1 & 2 |
TX4793 - 11kV Power 6.6MW
Height: 2m Width: 1.8m Bore: 360mm Approval: Baseefa EN50 014, 018 & 019 Code: EExde IIB T4 IP68 Zones 1 & 2 Protection: IP68 50 metres EN60529:1992 Testing: 70kV Impulse 
TX4798 - Intrinsically Safe Signals
Height: 550mm Width: 1m Bore: 330mm Approval: Baseefa EN60079-0, EN60079-7 & EN60079-11 Testing: Group IIC and Increased Ambient Temperature |
|
