ATEX Directive 94/9/EC
Compliant Equipment

We are working with our customers to schedule their replacement programmes for pre-existing equipment in hazardous areas which are not compliant with ATEX Directive 94/9/EC. The time-critical clauses of EC Directive 99/92/EC (also known as ATEX 137 or 'The Use Directive') state:

"Workplaces which contain places where explosive atmospheres may occur and which are used for the first time after 30 June 2003 shall comply with minimum requirements set out in this Directive."
Source:
Clause 3 of Article 9, Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999
 

"Where workplaces which contain places where explosive atmospheres may occur are already in use before 30 June 2003, they shall comply with the minimum requirements set out in this Directive no later than three years after that date."
Source:
Clause 4 of Article 9, Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999

We are happy to offer quotations for compliant equipment; please contact our Technical Sales department and quote your existing equipment model or serial number. If the equipment is not manufactured by us, please send the electrical and dimensional specifications so we can offer an equivalent unit.

The following equipment is compliant with the ATEX Directive 94/9/EC:

• TX4700 Series Slip Ring Units
• TX4705 Series Slip Ring Units
• TX4706 Series Slip Ring Units
• TX4715 Series Slip Ring Collector Column
• TX4726 Series Slip Ring Collector Column
• TX4727 Series Slip Ring Collector Column
• TX4728 Series Slip Ring Collector Column
• TX4740 Series Slip Ring Unit
• TX3700 Series Connectors
• TX3701 Series Connectors
• TX6900 Junction Box
• TX6901 Enclosure
• TX6910 Junction Box
• TX6911 Enclosure